- For Wood & Hardwood Charcoal.

- 12 x 12 x 11 Inches, (30x30x28 Cm). Weighs 40 Lbs, (18 Kg).

- Uses 4" Chimney Pipe (10 Cm).

- 7,500 - 18,000 BTU [ 2 - 5 Kw.] Heat Output.

- US EPA & State of Washington Emission Certification.
Modern "Clean-Burn" Technology - Non Catalytic.
When installing "on land" in Washington State,
Navigator's Outside Air Kit - #NSWOAK shall
be required. Call or Email for more info.

- Plain Iron or Porcelain Enamels (black porcelain stove pictured above).

- Right Hand Side Door Standard. Left Hand May Be Requested.

- Ultra-compact - The "Laptop" of cookstoves.

- Great For Smaller Boats or Sleeping Cabins Aboard Larger Vessels.

- 2/3'rds the size of the "Little Cod", similarly constructed.

- A Diesel/Biodiesel burner option will be available in the near future.

(If you retrofit the stove for liquid fuel, you can't burn solid fuel.)

A stout little stove!

$650 for Plain Iron or +$480 with Porcelain Enamel Option {$1130}

Compatible with our upcoming...

"Drop-In" Alcohol/Propane Burner Modules.



marinest@marinestove.com / 360 376 5161





Blue Porcelain LITTLE COD and SARDINE in Plain Iron.

***

Navigator's MODEL # NSW3. "HALIBUT"

Based on the old East Coast favorite from the USA : SHIPMATE #212

12/18/05
PRODUCTION IN PROCESS
CALL TO ADD YOUR NAME TO THE "BUILD LIST"




Solid Fuel Marine Cookstove

- For Wood & Coal - heavy firebox linings, shaker grate, ash pan,
oven thermometer, adjustable oven rack, full circular "oven mode" flamepath.

- High Temperature Glass Window in Firebox Door.

- Dimensions: 19.75” Wide x 15.625” Deep. (50 x 39 Cm)
15.5” to top of cook surface with legs. Legs are 3” High.
18.5” to top of cast bronze sea rail (not pictured).

- Weight: 165 Lbs. (75 Kg)

- Uses 4" Chimney Pipe (10 Cm).

- Approx. Output: 25-30,000 Btu’s.

- Plain Iron or Porcelain Enamel (std. & custom colors).

Price: $2550 / With Porcelain Upgrade: $3600

***

---

We're tooling up for our first HALIBUT production run!

Finally, the time has come to build some HALIBUT stoves! Thank you for your patience regarding this model. We proudly invite you to take part in our first production run.

The prototype was first on display at the Port Townsend Wooden Boat Festival where it met with great enthusiasm. This new model incorporates several features that will make this traditional solid fuel design even more appealing, practical, and long lived:

- Cast Bronze Sea Rails & Corner Posts Standard.
- Firebox Door Glass
- Stainless Ash Pan & Oven Rack.
- Oven Thermometer.
- Heavy Coal Linings with “Shaker Grate” & Handle.
- Porcelain Enamel Upgrade with "two-tone" speckled oven .
- Halibut Relief on Oven Door.

We look forward to hearing from you in the near future!
Please contact us at 360 376 5161 or by email, marinest@marinestove.com




HALIBUT Platform Size Minimums:

26” Wide - Minimum.
( leaves 2” gap between stove & shielding)

18” Deep - Minimum.
( leaves 1” gap between stove & shielding)

NOTE: dimensions take L & R and Rear 1” shielding into consideration plus an additional 2” each side to access turnbuckle hold-downs.

ALSO NOTE: The SARDINE is currently being retrofit for Diesel/Biodiesel. When we have that up and running
we will then offer a liquid fueled HALIBUT.

Alcohol Drop In Burners will also fit the HALIBUT.

marinest@marinestove.com / 360 376 5161